3D Printing & Laser

16 products

• Creality

  Grades 6–8Grades 9–12

  Ender 3 V3 3D Printer

  The Creality Ender-3 V3 is a filament (FFF) desktop 3D printer built around a CoreXZ motion system, in which the X and Z axes are linked and driven together. This layout lets it reach print speeds of up to 600 mm/s with accelerations of up to 20,000 mm/s², while a metal frame with die-cast parts keeps it stable during fast moves. It uses a direct extruder with a metal hotend and a hardened-steel, quick-swap 0.4 mm nozzle that heats to 300 °C, and a heated bed that reaches 110 °C. Two part-cooling fans help produce clean surfaces and overhangs. The printer handles 1.75 mm filaments including PLA, PETG, ABS, TPU and carbon-fibre-filled PLA and PETG, with layer heights from 0.1 to 0.35 mm. Files can be sent over Wi-Fi or USB and stored on 8 GB of internal memory, and the printer works with Creality Print slicing software and the Creality Cloud platform, with over-the-air firmware updates. In schools, it gives students a quick way to turn their CAD designs into physical prototypes for design, engineering and maker projects.

  Add to quoteView details: Ender 3 V3 3D Printer
• Creality

  Grades 6–8Grades 9–12

  Ender 3 V3 Plus 3D Printer

  The Creality Ender-3 V3 Plus is the larger version of the Ender-3 V3, offering a 300 x 300 x 330 mm build volume for bigger parts or several smaller prints at once. Like the standard model, it uses a CoreXZ design in which the X and Z axes are linked and driven by two high-torque motors, reaching up to 600 mm/s with accelerations of up to 20,000 mm/s². Its gantry and base are each made from a single die-cast aluminium alloy piece, and two support rods reduce Z-axis wobble, while two Y-axis motors move the larger print bed. A robust extruder, a tri-metal quick-swap nozzle and a 60 W hotend heater keep material flowing, and front and rear part-cooling fans help prevent warping, drooping and stringing. The printer connects over Wi-Fi and works with Creality Print and Creality Cloud, which makes it practical to manage several printers in a school lab or makerspace. Its larger build area suits group projects, models, prototypes and design-and-technology work that would not fit on a smaller printer.

  Add to quoteView details: Ender 3 V3 Plus 3D Printer
• Creality

  Grades 6–8Grades 9–12

  K2 Plus Combo Multi-Color 3D Printer

  The Creality K2 Plus Combo pairs the K2 Plus printer with one Creality Filament System (CFS) unit for multi-colour 3D printing. The CFS holds several spools and uses RFID to recognise the type, colour and amount of filament, switching between them automatically during a print. Up to four CFS units can be linked for as many as 16 colours. The K2 Plus is an enclosed CoreXY printer with a 350 x 350 x 350 mm build volume and a die-cast frame. It prints at up to 600 mm/s with accelerations of up to 30,000 mm/s², using an all-metal hotend and hardened-steel nozzle that reaches 350 °C, a bed that heats to 120 °C and an actively heated chamber for engineering filaments. Supported materials include PLA, PETG, PET, ABS, ASA and carbon-fibre-filled grades such as PLA-CF, PA-CF and PPA-CF. Dual AI cameras monitor prints, adjust flow and alert users to failures. The printer connects via dual-band Wi-Fi or Ethernet, has 32 GB of storage and works with Creality Cloud. In schools it supports advanced design projects, colour-coded models and functional parts.

  Add to quoteView details: K2 Plus Combo Multi-Color 3D Printer
• Creality

  Grades 6–8Grades 9–12

  Falcon 2 Laser Engraver

  The Creality Falcon2 is a 22 W diode laser engraver and cutter. Its laser module combines four 6 W diodes using FAC spot-compression technology, giving it enough power to cut 15 mm wood in a single pass and engrave at speeds of up to 25,000 mm/min. On stainless steel, the laser can produce a wide range of colours by heating the surface. A built-in air assist blows smoke away from the work and helps protect the lens; the airflow can be set manually with a knob or controlled automatically from LightBurn. The machine works with LaserGRBL and LightBurn on Windows and macOS, and it can also run offline from a TF card, with an offline dynamic preview for positioning jobs without a computer. Assembly takes only three steps. In a school makerspace or design-and-technology room, the Falcon2 lets students engrave and cut their own designs in wood and other materials, turning digital drawings into signs, models, puzzles and prototypes under appropriate supervision and safety procedures.

  Add to quoteView details: Falcon 2 Laser Engraver
• Creality

  Grades 6–8Grades 9–12

  Falcon2 Pro 60W Laser Engraver

  The Creality Falcon2 Pro 60W is a fully enclosed diode laser engraver and cutter. Its main module combines twelve 5.5 W lasers with FAC spot-compression technology to deliver 60 W of power, cutting 22 mm basswood or 30 mm black acrylic in a single pass. The beam power can be switched between three levels from the software or the machine, and a bonus 1.6 W module with a 0.06 x 0.06 mm spot is included for very fine, detailed engraving such as photos. The 400 x 400 mm workspace sits under a light-filtering lid and carries FDA Class 1 laser safety certification. Safety features include lid sensors that stop the laser when opened, warning lights, five-direction boundary sensors, automatic stopping if the machine is tilted, moved or dropped, a security lock and an emergency stop button. A built-in high-definition camera gives a full view of the work area for real-time preview and auto-positioning, making it easier to place and batch-process several pieces at once. Its enclosed design makes it well suited to school labs and makerspaces where students engrave and cut their own projects under supervision.

  Add to quoteView details: Falcon2 Pro 60W Laser Engraver
• ELEGOO

  Grades 6–8Grades 9–12

  Neptune 4 Max 3D Printer

  The ELEGOO Neptune 4 Max is a large FDM 3D printer for makerspaces and design labs that need room for big models or several smaller parts printed in one run. Its build volume measures 420 × 420 × 480 mm. The printer runs pre-installed Klipper firmware on a 64-bit ARM processor, reaching speeds of up to 500 mm/s with acceleration up to 8000 mm/s². A dual-gear direct extruder feeds a 300 °C high-temperature nozzle, so students can print with PLA, PETG, TPU, ABS, ASA and nylon on the heated build plate. A 121-point (11 × 11) automatic bed-leveling routine simplifies setup before each print. Files can be sent over Wi-Fi, LAN or USB, and the web interface allows remote monitoring and control of several printers on a network. Models are prepared in ELEGOO Slicer, making the Neptune 4 Max a good fit for older students moving from CAD design to large functional prototypes.

  Add to quoteView details: Neptune 4 Max 3D Printer
• AOSEED

  Grades 6–8Grades 9–12

  X-MAKER 3D Printer

  The AOSEED X-MAKER is a 3D printer designed to help young makers move from choosing ready-made models to designing their own. It offers a 150 × 150 × 150 mm build volume and 0.05 mm precision, enough for detailed toys, gadgets and school project parts. Printing is controlled through the AOSEED app, which includes more than 15 design games, AI-assisted creation tools, a library of over 8,000 ready-to-print models, and both block-based and more advanced 3D modeling options. Files can be sent over Wi-Fi, USB or SD card, and the printer supports PLA and ABS filament. A quiet motor keeps noise below 50 dB, which suits classrooms. The box includes the printer, a magnetic build plate, a PLA filament sample, a power adapter, a toolkit and a quick-start guide. Teachers can use it to introduce the full design-to-print cycle in STEM lessons.

  Add to quoteView details: X-MAKER 3D Printer
• AOSEED

  Grades 6–8Grades 9–12

  X-MAKER JOY 3D Printer

  The AOSEED X-MAKER JOY is an entry-level 3D printer made for children aged 4 to 12. Its fully enclosed, child-friendly design and compact 120 × 120 × 120 mm build volume make it suitable for first printing projects at home or in early-years and primary classrooms. Everything runs through the AOSEED app over Wi-Fi with one-tap printing. Children can choose from more than 8,000 ready-to-print models, play over 15 in-app design games, customize designs, and use AI creation tools that turn drawings, photos and ideas into printable models without any modeling experience. Prints are made in PLA filament with 0.05 mm precision. The package includes the printer, a magnetic build plate, PLA filament, DIY stickers and a toolkit, plus access to the digital model library and guided design modules.

  Add to quoteView details: X-MAKER JOY 3D Printer
• AOSEED

  Grades 6–8Grades 9–12

  PLA Filament 1.75 mm

  This AOSEED filament set provides 1.75 mm PLA in four colors (green, yellow, blue and purple), with each roll weighing 200 g. The small roll size is designed to fit the AOSEED X-MAKER and X-MAKER JOY 3D printers. AOSEED describes the material as non-toxic and environmentally friendly, and it prints with a smooth surface finish across small and larger models. The recommended printing temperature is 190–220 °C. Having several colors on hand lets students print multi-colored parts for projects, swap colors between components, and keep classroom printers stocked during STEM activities.

  Add to quoteView details: PLA Filament 1.75 mm
• eSun

  Grades 6–8Grades 9–12

  PLA Filament 1.75 mm

  eSUN PLA+ is a 1.75 mm filament supplied on 1 kg spools for FDM 3D printers. It is formulated to be stronger than standard PLA while keeping PLA's ease of use, with low warping, minimal stringing and clog-resistant feeding. Recommended settings are a nozzle temperature of 210–230 °C, a heated bed at 45–60 °C and full cooling fan, with printing speeds below 300 mm/s. The material is bio-based and biodegradable, and eSUN lists EN 71-3 and FDA compliance, which is relevant for toy and child-contact items. It ships vacuum-sealed with desiccant and is offered in more than 40 colors. In schools it is a dependable everyday material for prototypes, design projects and student models, with enough toughness for functional parts.

  Add to quoteView details: PLA Filament 1.75 mm
• 3Doodler

  Grades 4–5Grades 6–8

  Start+ 3D Printing Pen

  The 3Doodler Start+ is a 3D printing pen designed for children aged 6 to 13. It extrudes a low-temperature Eco-Plastic strand that hardens quickly, so children can draw on paper or straight up into the air to build three-dimensional objects. The pen has no external hot parts, making it safe for young hands. The pen is wireless and recharges via a USB-C cable; a full charge takes about 30 minutes and gives roughly 30–45 minutes of continuous doodling. It works only with 3Doodler Start+ filament, which is non-toxic, BPA-free and compostable at home. The Essentials set includes the pen, a charging cable, 72 filament strands and an activity guide with 10 hands-on projects. In the classroom it blends art with STEM, building planning skills, spatial understanding and problem-solving through tactile making.

  Add to quoteView details: Start+ 3D Printing Pen
• 3Doodler

  Grades 4–5Grades 6–8

  Create+ 3D Printing Pen

  The 3Doodler Create+ is a 3D printing pen that extrudes heated plastic which hardens quickly, letting users draw freehand in three dimensions or trace stencils to build models. 3Doodler's classroom version of the pen is designed for students in grades 8 to 12. The pen accepts several 3 mm filament types: strong, matte ABS; glossy, plant-based PLA; rubbery FLEXY for bendable pieces; and WOOD, which contains real wood fibers and can be sanded and stained. A temperature setting switches between ABS/FLEXY and PLA/WOOD, and Fast and Slow buttons control the flow, with continuous-extrusion and reverse modes. Interchangeable nozzles, including fine and wide tips, change the shape and thickness of the line. In the classroom, students can use it to design and build models of real-world structures and mechanisms, supporting project-based learning, problem-solving and creative thinking at a lower cost than a traditional 3D printer.

  Add to quoteView details: Create+ 3D Printing Pen